Measure

Information about measuring

SIRIUS HS limited to 200 kHz
If you have SIRIUS HS and some other devices with a lower maximum sample rate connected and you can't set the sample rate higher then 200kHz on the HS d...
Tue, 18 Feb, 2020 at 8:46 AM
More than one counters on counter input
It is possible to use three single counter signals with only one counter connector. You can connect each counter to a separate "IN" pin and to the...
Fri, 19 Apr, 2019 at 3:56 PM
Krypton DO pin-out description
Thu, 8 Aug, 2019 at 9:15 AM
Typical DO applications with Krypton DO
Here you can see the schematics for typical DO applications with Krypton DO:
Thu, 8 Aug, 2019 at 9:19 AM
Channel remapping
Channel remaping is a useful feature, because it solves a problem that engineers often face, therefore saving a lot of time. In this example we will create ...
Wed, 14 Aug, 2019 at 11:42 AM
Remote desktop connection options in Dewesoft NET systems
In DewesoftX user can choose between three screen-sharing technologies for remote desktop connection to slave measurement units in a Dewesoft NET system: Wi...
Tue, 4 Jan, 2022 at 1:27 PM
High pass filters on Sirius ACC in IEPE mode
ACCv1: - hardware 1 Hz (-3dB) 1st order HP filter + Software 0,1Hz (-3dB) 2nd order Butterworth HP filter - hardware 1 Hz (-3dB) 1st order HP filter + S...
Mon, 13 Jan, 2020 at 10:38 AM
SIRIUSe analog ouput via EtherCAT connection
Explained below are the different functionalities that can be used on SIRIUSe device. It is important to pay special attention to the function generator mod...
Tue, 10 Mar, 2020 at 1:44 PM
Synchronisation time source (Clock/Trig, IRIG, GPS PPS)
You can adjust the synchronization time source for the system in the Device Settings. The clock provider can be a Dewesoft DAQ device (the device generates ...
Mon, 17 Jan, 2022 at 12:36 PM
How to provide NTP synchronisation from master client to measurement units in local network
Did you know that your Windows operating system can be used as a Clock provider for NTP? Here is a guideline for setup. Instructions are valid for the f...
Fri, 12 Mar, 2021 at 9:13 AM