Measure

Information about measuring

Disable HW sample rate dividers
What does this option mean? Description of sample rate dividing  By default, the sample rate dividing is performed directly on the device.  This op...
Thu, 17 Mar, 2022 at 1:39 PM
Counters with very slow signals
The minimum frequency that can be measured with a tacho sensor on the counter inpt is 5 Hz (300RPM). This is because we have a maximum of 200ms buffer to w...
Thu, 30 May, 2019 at 4:09 AM
Using two EtherCAT chains on a single computer
Unfortunately, switch can't be used to connect multiple EtherCAT chanins to a single computer, but there are other options to do so.  1. Use compute...
Thu, 4 Apr, 2019 at 11:25 AM
Channel types in Dewesoft
Depending on what you are measuring, and mathematics, the channels can have 3 different ways of sampling: 1. Synchronous - These channels have a constan...
Fri, 28 Dec, 2018 at 2:50 PM
NTRIP Configuration - DS-IMU1
link to register and use NTRIP: https://drive.google.com/open?id=1dKja9vjKV-uW-8BL6ZOSt-YT9WRs0kzSyoSvp6qFZgg   NTRIP registration https://register.rtc...
Wed, 25 Mar, 2020 at 11:41 PM
Using signal conditioning on Sirius
Go to "Analog in" channel setup and select channel for analog output and select Setup. Click the "Edit" button and change the Mode to Ch...
Fri, 26 Nov, 2021 at 3:13 PM
DS-IMU GNSS and System status
You can easily see all the possible statuses of the GNSS and System status channel of DS-IMU device. All you need to add is a discrete display VC and press ...
Thu, 12 Sep, 2019 at 10:59 AM
Low-pass filters on Sirius HS
1. The 100 kHz filter is a hardware filter and is always applied except for when the "Off" option is selected in the dropdown menu.  This hardwar...
Fri, 9 Oct, 2020 at 10:03 AM
Using Sirius with sample rate 204,8kHz
To use the 204,8kHz sample rate, the option needs to be enabled in the settings: Settings -> Advanced -> Hardware -> Set Sirius sample rate limit ...
Mon, 13 May, 2019 at 11:40 AM
How to generate CAN bus message transmit indicator
In this article is described the generation of CAN bus message activity indicator: green status means active transmitting of messages and red status means ...
Fri, 12 Mar, 2021 at 12:33 PM