Measure
Information about measuring
Description of the workaround: How to set and generate a PWM signal in Dewesoft? Description of the solution: Requirements: To use the PWM in Dewe...
Thu, 18 Jul, 2024 at 9:36 AM
If the default settings are used, the tacho sensor can measure as low as 5Hz. If lower frequencies are needed first the maximum calculation delay needs to b...
Tue, 4 Feb, 2020 at 11:32 AM
The behaviour of the asynchronous channels when storing with Multi file option depends on the time stamp of asynchronous channel, time duration of one Multi...
Mon, 14 Jan, 2019 at 2:58 PM
Because Dewesoft is unable to output the asynchronous channels, we must first change the channel by using a formula. First add formula which will output...
Wed, 23 Jan, 2019 at 2:27 PM
Dewesoft allows outputting the signal also in the analyse mode. To use this option, first connect the device which has analog out option (BNC ports on ...
Mon, 13 May, 2019 at 3:27 PM
Integrated Electronics Piezo-Electric IEPE is a set of initials for “Integrated Electronic Piezo Electric”. It is a standard for electronics in transduc...
Wed, 27 Oct, 2021 at 9:27 AM
From FFT preview Select Channel Set Sample rate eg. 50kHz Set FFT options to: DC Cutoff 10Hz Line resolution 8192 lines (df=3.05 Hz should be ...
Thu, 11 Jun, 2020 at 9:56 AM
The Sample rate can be default set to a minimum 100Hz, but if you want to have a lower Sample rate which can go down to 1Hz, you need to follow the next ste...
Thu, 27 May, 2021 at 8:17 AM
If you want to store data file at an exact hour (1:00, 2:00,...), Dewesoft offers a simple solution. To do this the "Make new file after" opt...
Fri, 27 Sep, 2019 at 11:46 AM
For using the Sound card in DewesoftX, the Audio card plugin needs to be added to the Addons folder. The audio card plugin can be found on our webpage under...
Thu, 15 Jul, 2021 at 2:10 PM