Troubleshooting
Useful information about troubleshooting
Don't worry, the device is usually showing this error just because the synchronization is not set-up correctly. If the IMU receives the signal through...
Wed, 23 May, 2018 at 10:36 AM
Sometimes when loading a setup file with a lot of channels, it is possible to get the out of memory error. If the computer has more then 4GB or memory, it i...
Wed, 19 Dec, 2018 at 8:54 AM
Issue start: X3 SP5 Release 181228 Issue fix: X3 SP6 Release 190327 To resolve the issue what you can do is to copy all the files from the ...\Bin...
Fri, 3 May, 2019 at 4:05 PM
The IMU devices don’t send out data if channels are not set to used and IMU device updated The channels are not set to USED Please set the channels to ...
Mon, 11 Mar, 2024 at 1:40 PM
Description of the problem The computer is having trouble recognizing the Dewesoft EtherCAT devices. Description of the solution Here are the steps th...
Thu, 14 Dec, 2023 at 3:13 PM
The first step is to change longitude and latitude to minutes. If longitude and latitude are in degrees you need to make a math formula where you multip...
Tue, 18 Dec, 2018 at 3:56 PM
RT device cannot be discovered by DewesoftX if Windows Firewall is turned on and DewesoftX was not added as a firewall exceptions during its installation or...
Wed, 16 Aug, 2023 at 3:32 PM
The OptoStream GEV Filter Driver uses the 256-bit certificate. To install the OptoStream, the Windows needs to be updated to Windows 7 service pack 1. ...
Wed, 23 Jan, 2019 at 11:54 AM
Sometimes when the Ultra VNC is used for the connection to the slave measurement units the error appears: In such a case, follow these steps which ...
Fri, 19 Apr, 2019 at 4:41 PM
If there is no GPS signal or the signal is poor, these are the things you can try: 1. Try adjusting the GPS antenna The antenna should be always mounted...
Thu, 31 Jan, 2019 at 11:29 AM