FAQ

Frequently asked questions

Multifile opening with Sequencer
This article gives basic information about how to open Multifile with Sequencer.  Use the Action block and find the "LoadFile" in the DCOM str...
Wed, 22 Jul, 2020 at 11:42 AM
How to calculate basic statistics for positive and negative slope
To calculate the basic statistics for positive and negative slope first, you need a trigger. In this case, we have to use two formulas to create a trigger. ...
Tue, 1 Sep, 2020 at 1:26 PM
How to properly order Asynchronous data in Excel
When exporting asynchronous data to Excel, the data will be exported with the Dynamic acquisition rate. In case the rate of the asynchronous channel is real...
Thu, 3 Sep, 2020 at 7:41 AM
OPC-DA protocol compatibility with Dewesoft OPC-UA client/server
The OPC-DA (Data Access Protocol) protocol supports the older version of data modelling and therefore is not compatible with the newer OPC-UA (Unified Archi...
Tue, 29 Sep, 2020 at 9:07 AM
Generating pink noise with Dewesoft mathematics
Attached is a setup that filters the pink noise out of the white noise. 
Wed, 16 Dec, 2020 at 3:00 PM
Channel connection setup guide
Channel connection is a new feature which can come handy when some of the sensors with TEDS have been used with particular math channels and display widgets...
Thu, 1 Apr, 2021 at 2:31 PM
Custom ramp for user inputs
By default, the User inputs in Dewesoft will jump to the next value within one sample like shown in the picture below but sometimes a slower transition is r...
Mon, 22 Mar, 2021 at 11:35 AM
Connecting pull-up resistor on digital output
This article explains how to simply connect a pullup resistor to get the digital outputs to work.  L1B7M-OPEN-Xm CABLE PINOUT: On our DAQ instrume...
Mon, 22 Mar, 2021 at 2:06 PM
Envelope detection, envelope not visible
When exporting only part of acquired data sometimes the envelope is not displayed. For envelope detection the line resolution has to be correctly set. When ...
Mon, 26 Jul, 2021 at 3:28 PM
Function generator arbitrary signal output frequency
The time and frequency need to be set correctly to output the arbitrary signal from the function generator with the wanted frequency.  On the i...
Thu, 5 Aug, 2021 at 12:43 PM