Frequently asked questions

Changing the number of shown decimal places
The resolution properties of a channel can be changed either in the properties of the channel selector, in channel setup or on the global channel list.   ...
Wed, 12 Feb, 2020 at 12:55 PM
Re-sampling signal to custom rate
When the  signal is exported with a custom export rate, the values get adjusted the following way.   For example, we want to export the green signal wit...
Fri, 12 Mar, 2021 at 9:26 AM
How to use channel in formula by name, not by index
When any channel is used in the formula, it is memorized by its index. But in certain cases it is useful that the channel is memorized by its name. For ...
Sun, 22 Dec, 2019 at 11:02 PM
High pass filters on Sirius ACC in IEPE mode
ACCv1: - hardware 1 Hz (-3dB) 1st order HP filter + Software 0,1Hz (-3dB) 2nd order Butterworth HP filter - hardware 1 Hz (-3dB) 1st order HP filter + S...
Mon, 13 Jan, 2020 at 10:38 AM
Formula Keypressed command list
The Keypressed option in formula uses the virtual key codes. Here is the example for enter key on keyboard: Symbolic constant nameValue (decimal)Mouse...
Thu, 16 Jan, 2020 at 9:44 AM
GPS fix quality values
The GPS fix quality is measured from the signal source and has more than one possible statuses. All the possible statuses can be seen with the discrete disp...
Thu, 6 Feb, 2020 at 8:11 PM
Filename from dynamic input
Very often performing numerous measurements with different setups means a lot of data files which is difficult to group and classify. Changing store filenam...
Thu, 13 Feb, 2020 at 2:01 PM
Krypton LED blinking codes
Each Krypton slice has 3 green LEDs: L - D - L. The LED blinking codes adhere to the EtherCAT specification.  L means Link: i.e. the In- (left L-LED) or O...
Tue, 11 Feb, 2020 at 7:47 AM
LORD sensors which were tested with LORD Micro Strain plugin
3DM-GX5-25 SHM-Link V-Link-200 G-Link-200 SG-link-200-OEM 3DM-GX5-15
Wed, 12 Feb, 2020 at 4:05 PM
Difference between Master/View/Slave client in NET system
In this guide, we'll take a look at the differences between the Remote modes in the Dewesoft NET system.  1. Master client: Can control the measur...
Mon, 24 Feb, 2020 at 7:50 AM